Cutting Chart
Crown molding cutting made easy!
CUT WITH CONFIDENCE
Crown molding miter cutting angle chart
Cutting Creative Crown flat back foam crown moldings. There is no more spring angles to figure. No more complex compund miter cuts to make. Our crown moldings cut in most positions in most miter saws.
Our 3-1/2″ crown moldings can normally be cut right side up or upside down with the back flush against the fence in most 10″ and 12″ miter saws.
Our 4-1/2″ and 5-1/2″ crown moldings will normally need to be cut upside down in most 12″ miter saws. You can also cut these moldings flat on the table of the saw with the face up. It’s very simple with our flat back foam crown moldings!
EXAMPLES: A 90 degree corner is two 45 degree cuts. A 45 degree corner is two 22.5 degree cuts. There are no bevels or spring angles needed with flat crown moldings
Foam crown molding corner angle cutting chart
Angle Of Corner | Cut Each Side To This Degree |
---|---|
180 | 0 |
179 | 0.5 |
178 | 1 |
177 | 1.5 |
176 | 2 |
175 | 2.5 |
174 | 3 |
173 | 3.5 |
172 | 4 |
171 | 4.5 |
170 | 5 |
169 | 5.5 |
168 | 6 |
167 | 6.5 |
166 | 7 |
165 | 7.5 |
164 | 8 |
163 | 8.5 |
162 | 9 |
161 | 9.5 |
160 | 10 |
159 | 10.5 |
158 | 11 |
157 | 11.5 |
156 | 12 |
155 | 12.5 |
154 | 13 |
153 | 13.5 |
152 | 14 |
151 | 14.5 |
150 | 15 |
149 | 15.5 |
148 | 16 |
147 | 16.5 |
146 | 17 |
145 | 17.5 |
144 | 18 |
143 | 18.5 |
142 | 19 |
141 | 19.5 |
140 | 20 |
139 | 20.5 |
138 | 21 |
137 | 21.5 |
136 | 22 |
135 | 22.5 |
134 | 23 |
133 | 23.5 |
132 | 24 |
131 | 24.5 |
130 | 25 |
129 | 25.5 |
128 | 26 |
127 | 26.5 |
126 | 27 |
125 | 27.5 |
124 | 28 |
123 | 28.5 |
122 | 29 |
121 | 29.5 |
120 | 30 |
119 | 30.5 |
118 | 31 |
117 | 31.5 |
116 | 32 |
115 | 32.5 |
114 | 33 |
113 | 33.5 |
112 | 34 |
111 | 34.5 |
110 | 35 |
109 | 35.5 |
108 | 36 |
107 | 36.5 |
106 | 37 |
105 | 37.5 |
104 | 38 |
103 | 38.5 |
102 | 39 |
101 | 39.5 |
100 | 40 |
99 | 40.5 |
98 | 41 |
97 | 41.5 |
96 | 42 |
95 | 42.5 |
94 | 43 |
93 | 43.5 |
92 | 44 |
91 | 44.5 |
90 | 45 |
89 | 45.5 |
88 | 46 |
87 | 46.5 |
86 | 47 |
85 | 47.5 |
84 | 48 |
83 | 48.5 |
82 | 49 |
81 | 49.5 |
80 | 50 |
Cut an inside corner
Cut an outside corner
Cut an outside bullnose corner
Cut vaulted down corner for angled ceilings
Cut vaulted up corner for angled ceilings
Cut a square dead end / return for the end of molding runs
Cut a tapered dead end / return for the end of molding runs
Cut a back to back corner for an end wall or island wall
See how to cut a large angled 130 degrees etc.
Your foam crown molding is waiting for you today!
Give us a call or text or email us a picture or diagram of your room and we would be happy to discuss options to give you the best outcome.
